Despre Noi

HHO France is a project started in the beginning of 2010.

We design and manufacture HHO-generators and peripheral devices assisting their operation. We manufacture Brawn’s Gas Generators working with all internal combusting engines powered by diesel, petrol, autogas – propane-butane or methane. New is HHO generators and HHO chip for common rail engines.

Our Hydrogen Machines are certified in accordance with European Standards and in conformity with the national standards under Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006.

Our products are in conformity with the requirements of:

“Eltest Certification” Ltd. certified that the electrical facility complies with the applicable essential requirements for it to Directive 2006/95/EC, implemented by the Ordinance on the essential requirements and conformity assessment of electrical equipment designed for use within certain voltage limits.

These products are marked with the initials 2024 and Expert’s Report No.021/29.07.2012 is issued to the product by “Eltest sertifikatsiya” Ltd., a person for conformity assessment with identification number 2024.

We produce various electronic devices for operation control of HHO-generators such as PWM Process Controller – this is a unique device designed by us. This process controller is intended for operation control hydrogen generators. It was developed to dosage amount of HHO gas depending of engine needs in the moment. The controller alters the engine consumed amperage, depending of engine operating mode and controller doesn’t allow the battery to consume amperage. The controller makes so that the Brawn’s gas to be produced by excessive amperage from vehicle alternator.

We produce various electronic devices which are required by advanced vehicles in order to achieve economy when it runs on HHO-gas. These are EFIE electronic chips attached on the diesel engine common rail and on the fuel injection system of the modern petrol engines.

We also produce HHO-generators designed for large trucks with engine volume above 10 000 cc, common rail EURO 4 and EURO 5. Our Hydrogen Generators for trucks were developed as very reliable devices and they are very easy to maintenance. They are designed for high load operation at and they should be filled with distilled water every 2500 km.